what is a parallax error?

Parallax error is the error that is most committed when readings are taken in physics. You can thus understand why it is important to avoid it at all cost. One must be aware of its existence at all time so that it can be avoided and as a result the true value of the reading is obtained.

The concept of parallax error is related to the term parallax.

Imagine that we have  in a room a pelican and a flamingo as shown in fig 1 below.

Fig 1

Now Garfield is moving about in the room and each time is is somewhere in the room, he looks at the two birds. At the point A he sees the flamingo on the left of the pelican whereas when he is at position C he would see the flamingo on the right of the pelican. Only when he would be at position B would he sees the two birds one behind the other.

He would discover that each time he is at a different position, he would find that the position of the flamingo relative to the pelican has changed.

You can also have this effect when you are in front of a clock. If you move from side to side you would find that the time that you can read from the clock is different. 

So we can the understand that the parallax is the change in the apparent position of an object when the position of the observer changes.

Now let us look at the concept of parallax error. If you have placed a pencil on a metre rule and you are reading its length then just like in fig 1 above and in fig 2 below you can place you eye everywhere you want.

Fig 2

As you can see from fig 2 above I have chosen three position at which you can place your eye.

Clearly at these three position we can have the following reading

Reading at A  = 6.2 cm

Reading at B  = 5.8 cm

Reading at C = 5.5 cm

What you you think would be the correct reading?

The correct reading is would be obtained when the eye is placed at B.

 

 

Fig 3

Now there is a line from the tip of eye to the of the pencil  that continues up to the scale. this line is called the line of sight and the mark at which the line intersect the scale is the length of the pencil. This line of sight must be be at right angle to the scale. This is shown above in fig

If the line of sight and the scale are not ar right angle to each other then a parallax error is committed.

Similarly with a measuring cylinder the line of sight from the eye to the bottom of the meniscus must be at right angle to the scale as shown in fig 4 below. In this case the line of sight is horizontal and the scale vertical.

 

Fig 4

So as you can see above each time you are taking a reading you must ensure that the line of sight is perpendicular to the scale.

What is a zero error?

We have seen in a previous post what an error is. I am now going to talk about the zero error.

As the name suggest the error has a relation with the zero mark on a scale.

As you can see in fig 1 and fig 2 the scale on a measuring instrument can be either straight as on a meter rule or circular as on an ammeter.

Fig 1

Fig 2

Straight scale

Now when you measure using such instruments it is necessary for you to pay particular attention to the zero mark. If you are using a metre rule then one end of the object must be placed on the zero mark as shown in fig 3 below.

Fig 3

However some measuring instruments have the the zero mark that start slightly inside like in the second diagram in fig 3 above. Be careful.

Now if the object is not place on the zero mark as shown in fig 4 below then a zero error is committed. 

Fig 4

Can you read the scale and tell me what is the length of the object?

Now as you can see the  object is not placed starting on the zero mark. It is place on the o.2 cm mark. This 0.2 cm mark is the magnitude of the error. As you can also see the object’s other end is on the 2 cm mark. Since the other end of the object is not place on the zero mark, the length obtained will be greater that the true value.

Hence the length of the ruler = 2.0 – 0.2 = 1.8 cm

It is important to identify the magnitude of the error and then to  remove it from the reading with the error to get the true reading.

Circular scale

When there is a circular scale, there is always a pointer like you can see on an ammeter or voltmeter. Now if you want to have the correct reading it is important for the pointer to be on the zero mark before it is used. If the pointer is not initially on the zero mark then a zero error would be committed.

Fig 5                                                                      Fig 6                                                       

In fig 5 above you can clearly see that the pointer is on the zero mark before use, and as a result there is no zero error and the correct reading from fig 6 is 0.8.

Let us look at two examples where the pointer is not initially on the zero mark.

Fig 7                                                                            Fig 8                                             

 

In fig 7 the pointer is not on the zero mark before use. So in this case the solution is to adjust the pointer until the error is removed. If that is not possible then the magnitude of the error needs to be determined. In our example the the magnitude of the error is 0.3. Hence all measurement taken with this apparatus will be greater by 0.3. After the meter is used the reading is o.8. Then adjusted for the error

The true value = 0.8 – 0.3 =0.5

Fig 9                                                         Fig 10                                                    

In fig 9 the pointer is on the left side of the zero mark. The magnitude of the error is 0.2. But as you can guess when the meter is in used the reading obtained will be less than the true value. Hence the reading from the meter in fig 10 is smaller than the true value and as a result the magnitude of the error must be added to the reading. Hence

The true value = 0.8 + 0.2  = 1.0

What is an error?

As we have seen in an earlier post, a physical quantity is a property of an object that can be measured with a measuring instrument.  Hence when you use a measuring instrument you would obtain a reading. The reading is simply a numerical value that you can read off a measuring instrument such as the volume off a measuring cylinder or the time off a stopwatch.

We must also introduce what is called the true value. The true value is the reading that you would obtain if the measurement is done in ideal conditions.

In order to obtain the the true value the following conditions must be present:

1. You must have the skills to use the instrument and know the steps that must be followed to obtain the reading.
2. You must be using instruments that are properly calibrated and are not damaged.
3. All the conditions that are required to obtain the true value must be present. For example 1/3 of the stem of the thermometer must be immersed in the liquid, the pressure must be one bar, the liquid used in the measuring cylinder must have a temperature of 20⁰C.
4. If a calculation is needed to determine the magnitude of a physical quantity, then the correct equation and the right constant must be used.

Now an error is made when the reading that you obtain is not equal to the true value.  And the magnitude of the error is the difference between the reading obtained and the true value.

Then we can thus introduce the term accuracy and precision.

A measurement is accurate if it is close to the true value. And if there are two values then the one that is closest to the true value is the most accurate.

The precision of an instrument is the smallest value that can be measured using the instrument. Hence if a length is measured using a metre rule then it is precise to 1 mm or it has a precision of 1 mm. However a length that is measure using a vernier caliper has a precision of 0.1 mm. Hence the length that is measure using a vernier caliper is most precise.